-
Error reported, is there a solution
rtc-hym8563 5-0051:no valid clock/calendar values available.
-
Sometime it might become handy to be able to retrieve uptime information from the printer - and if no other timers are handling it, and might be achieved if a RTC (RealTimeClock) chip is connected to …
-
Could it be possible to make WLED sync the internal time from your device time.
Like on the press of a button (sync device time) and it grabs the local device time (from the browser or something?)
…
-
This applies to the [Alarm Clock Build webpage](http://start.shrimping.it/project/alarmclock/build.html) generated from markdown source [here](https://github.com/ShrimpingIt/website_text/blob/master/s…
-
**Describe the bug**
ds1307_init() zeroes-out the "SECONDS" field of the time in the DS1307 device, corrupting the time.
**Details**
ds1307_init() correctly clears the DS1307's "Clock Hal…
-
The PiJuice Zero is a great little unit. I have been using the PiJuice Zero for a project with a Pi 3b running Buster, and have found that after some time (and dozens of power cycles), the Juice will …
-
В какой-то момент решил снабдить свое устройство часами. Вставил часы, но после подключения этой библиотеки и создания объекта, часть выводимой отладочной информации в Serial монитор пропадает, а иног…
-
I had my RPi waking up 4 time per day 8,12,14,16. I had configured the PiJuice to do this, honestly it worked flawlessly for approximately 1 month. I have it wake up, run a python script, shutdown, …
-
In the Discord channel was mentioned that the I2C bus does not work for the STM32 board in Arduino mode.
There is more than one problem:
1. The local files for the I2C LCD display with "Wire2" do …
-
Hello,
I have one of your PiJuice Hats on my Raspi 3B+. Running your latest software and firmware, the device will not turn on automatically. For testing I have it set to start every 5 minutes.
…