-
hi .
i use IR with Wemos.
so itry to send via mosquitto command but it seems that didnt work:
mosquitto_pub -t cmnd/sonoff/irsend -m "0,4404, 4422, 534, 1632, 510, 574, 562, 1604, 536, 1632, 562,…
rt400 updated
5 years ago
-
I testet you code with two different sensores: DS18B20 (what it is designed for) and DS1820.
Found different values:
DS18B20 leads to values around 25.5 whats correct.
DS1820 leads to values around…
-
Hello Jose, first of all thank you for your perfect work.
I'm installed epsurna 1.12.4 on my wemos d1 r1 (old version from 2015).
I connected ds1820 to gpio4, led to gpio 13 and button to gpio 5 a…
-
Currently, Home Assistant users use the Openhab MQTT template changing the Controller Subscribe and Publish.
As stated in home assistant documentation:
https://www.home-assistant.io/components/sens…
-
Detect DS1820 sensors and read the temperatures
-
tbl = {}
tbl.value = 1234475220
print(tbl.value)
require('cjson').encode(tbl)
/ > tbl = {}
/ > tbl.value = 1234475220
/ > print(tbl.value)
1234475220
/ > require('cjson').encode(tbl)
{"valu…
-
Hi,
I tried to set resolution to 9 bit in my project, but it wasn't work. So I upload the "Tester" from examples and I've something like that:
> Dallas Temperature IC Control Library Demo
Locatin…
-
When I send some data from device to server, I get the acknowledgement back. But I don't want to get the acknowledgement. Could you say how to configure this ?
-
Hi,
Thanks for all the great work so far!
Full disclosure, I am new to this so may very well have messed up somewhere!
I am having some issues with humidity sensors and one of my temperature pr…
-
Hi
I'd like to read the temperatur with my motioneye Raspi too. I use the DS1820 1-wire sensor with 3 pins and 4,7kOhm resistor.
With an other Raspian raspi I tested it and it works. But under Moti…