-
Dear Edragon,
do you know how to flash an Arduino sketch to the LGT8F328P (without bootloader) using Arduino as ISP?
I only found documents how to flash the LGT8F328D.
-
Dear all, with the newest release 5.0.4 I observe:
- For most of the time Home App is showing "no response" for the windows covering and temperature sensor accessory after **successful** pairing.
-…
-
hi, i have classic display SSD1306 like this:
i connected to RPI. all working ok in no…
ghost updated
3 years ago
-
Hi There,
Anyone has succeed to use a 128x64 single panel with FM6126A?
Display is correct but missing part, or superposed part, can't have full area.
As one single was not working, then trie…
-
Hi *,
I'm using this awesome lib to drive P10 RGB (no SMD) Matrix; pixel mapping is OK and images look good on the display.
Doing some brightness benchmark with demo-main.cc apps (-D 1, -D 4 and so …
-
Hi guys thanks for work for this library.
I read that other people had simular problems with first use, but with their solution i couldn't solve my problem.
I wired the display after the schemati…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Sending a Shutterstop (via MQTT or console) does not stop the shutters.
Command is visible in console and count…
-
I would prefer using ethernet instead of wifi for reliability.
Would the [WESP32](https://wesp32.com/hardware/) or [Olimex's ESP32-POE-ISO](https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/r…
-
This is great source for MPU9255 but I found error and unstability of sensor data in readsensor() when I printed raw data:
// display the data
Serial.print(_axcounts);
Serial.print(" \t");
…
-
I get a bit of flicker on the adafruit version so I am trying the https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
It works great with hzeller examples: ie
"sudo ./…