-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [ ] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
-
I see how you can specify an IP address for grblHAL to the sender. There does not appear to be a mechanism to find the IP address. In grblHAL there are extensions to set all the network parameters but…
-
**Bose Control Space Devices**
For example: ControlSpace EX-1280 - All devices of the series use the same protocol
**Functions:**
The signal processor has several modules that can be controlled …
-
A container is configured to listen for DNS requests on all IP's on port 54:
```
/usr/bin/docker-proxy -proto udp -host-ip 0.0.0.0 -host-port 54 -container-ip 172.19.0.2 -container-port 53
```
Wh…
-
If you commit with generatekeys set to true while not at the top (ie, if you're in say "edit protocols tinc test" level) you get the following error:
```[edit protocols tinc test]
nvx@ERL# commit
[ p…
-
### Feedback
existing text has a section called "What does Thread have to do with Matter?" and a subsection called "THREAD DEVICES DON’T NECESSARILY SUPPORT MATTER", it seems like something conspicuo…
-
### What is your ISP? (if relevant)
KPN
### Diagnostic Information
Output of ifconfig -a:
root@UCG-Max:~# ifconfig -a
br0: flags=4163 mtu 9216
inet 192.168.1.1 netmask 255.255.…
-
**Device Description**
This device is a fuel cell cabinet controller. The cabinet includes four fuel cells and four batteries as well as the controller and a myriad of sensors.
**Device Access**
…
tjzay updated
3 months ago
-
load factory default 恢复出厂
# 进入配置模式
configure
# 设置主机名
set system host-name EX3300-Switch
# 设置根密码
set system root-authentication plain-text-password
New password: [输入新密码]
Retype new passw…
-
@larsgrim We are developing some hardware for Thorvald such as penetrometer and I was thinking about a serial communication standard and protocol that could potentially be shared by all external low-b…