-
## Issue Description ##
I run srsRAN on X310 USRP devices. During operation I see this message a lot. What does it mean ? What could be causing it ?
Any solutions ?
## Setup Detail…
-
## Issue Description ##
When I run `uhd_usrp_probe`, sometimes it shows the following error:
[ERROR] [RNOC: :GRAPH Caught exception while initializing graph: RfocError: Op Timeout: Con…
-
Hi Franco,
I am writing a program called [SPECTRE](https://github.com/jcfitzpatrick12/spectre), which is a Python-based framework for recording and visualising radio spectrograms. With the help of …
-
Opening an issue here for tracking/linking purposes. The initial discussion occurred on the mailing list (http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2020-December/063312.html).
Sh…
-
I am running OpenBTS_UMTS on Ubuntu 16 but can not see the signal when I check on my Nexus and Iphine6 phones. here are my audit logs:
/OpenBTS$ sudo ./OpenBTS-UMTS
1498833143.790579 140246743963456…
-
## Issue Description ##
I am building a UHD driver on a raspberry pi 3 B+ Model. When doing sudo make install it says "Building CXX object python/CmakeFiles/pyuhd.dir/pyuhd.cpp.o Then it …
-
Library name:
SoapySDR
Library description:
SoapySDR is general software defined radio.
That works universally accross all RF platforms.
Hacker RF , LimeSDR , Ettus etc....
Source repos…
-
Trying to get couple of UmTRX v2.1 working with UHD with no luck :(
Steps followed:
1. built and installed GNURadio and uhd using pybombs
1. Checked out UHD-Fairwaves repo from GitHub.
1. Re…
-
## Issue Description ##
UHD Error : Exception caught in safe-call
## Setup Details ##
I am running srsLTE 20.10.1 with UHD 3.15.0.
I have EPC and ENB and a Front-End.
Images below are the er…
-
## Issue Description ##
I have an X410 usrp device and I want to run the rfnoc_rx_to_file example, I have logged the value of spp and mtu in radio and DDC blocks, however, I want to chang…