-
I run two waveshare adapters on one raspberry pi and noticed that the assignment of the device address after a reboot is random. This is unfortunate as the assigned hardware might get swapped after a …
Phi2k updated
7 months ago
-
```
What steps will reproduce the problem?
I have an Ainol Aurora running ICS 4.0.3 - the OTG USB mode work for bluetooth
devices but it doesn't detect an FT232RL chip on several different Arduino
b…
-
I have four FPGA devices on one PC and I realized that devindex is not constant. devindex=0 for the FPGA on PC A. Next time I turn on the PC, I may need devindex=1 to properly turn on the FPGA on PC A…
-
Please add support for the MX25L6406E (8MB), data sheet at http://www.macronix.com/Lists/DataSheet/Attachments/3223/MX25L6406E,%203V,%2064Mb,%20v1.9.pdf
Using a FTDI UM232H it works nicely. I've adde…
-
- Debian Jessie on Raspberry PI2
Hi,
since with every reboot of raspbian (belive it is the same with other UNIX systems) the USB port assignments are jepardized if several serial devices are attac…
-
Scenario:
Hardware:
RPI3, 4.14.22-v7+, /boot/.firmware_revision: v634741d4199871ab8bd5446a8e63b7e06c1885af (latest by today)
Device: 3D Printer, FTDI Fake Chip: FT232RL, 0403:6001, SerialNumber: …
-
### Introduction
In OH core there is a PR [#3922](https://github.com/openhab/openhab-core/pull/3922) which on new OH installations does the following..
1. scan USB devices on the user's system
2.…
-
I'm using this library in docker. Docker add usb device permissions in container, but library in container see all ftdi devices, so return an error when it finds unauthorized device. Problem was solve…
-
Hi, I am trying to get readings from my EC sensor. I have already connected my EC chip to my USB EZO isolated board. The board is detected by my rapsberry pi, but when I send the R command to get a re…
-
```
What steps will reproduce the problem?
I have an Ainol Aurora running ICS 4.0.3 - the OTG USB mode work for bluetooth
devices but it doesn't detect an FT232RL chip on several different Arduino
b…