-
I've had to use the GPS with PyTrack, but since it wasn't ready, I've wrote my own code.
My only doubt is: SyPi has two I2C Buses, right? Would Pytrack with SyPi issue an error, since using a Bus …
-
Within a dump mat file created by the tracking configuration for Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking and Tracking_E6.implementation=Galileo_E6_DLL_PLL_Tracking:
is tracking c…
ghost updated
8 months ago
-
-
### Describe the bug
Started with quad on 4.2.11 with GPS working.
1) Flashed 4.4.0 using Configurator 10.9.0 RC2 in classic mode.
On Ports tab, I set Uart 4 to GPS (same as it was on 4.2.11).…
-
### DB Selector
DB3K
### Baseline
1738 (Kh59)
### Hypothetical
No
### Name
Kh69
### Length (m)
4.19
### Width/Span (m)
2.45
### Diameter (m)
0.4?
### Weight (kg)
770
### Range (nm)
15…
-
Creating new, because original issue was closed #98
Finally find cause of serious gps bug. After a while SV in use is dropping to 5 from 16(max @10hz). This RTH is impossible. Using latest Neo-M9N un…
-
Would [this](https://gnss.store/lea-m8f-timing-gnss-modules/43-elt0030.html) GNSS receiver work with your clock kit?
I know it's a very fancy module but I'm curious whether it would work or not.
On …
-
### DB Selector
DB3K
### Baseline
JSOW
### Hypothetical
No
### Name
Tianlei 500
### Length (m)
As JSOW
### Width/Span (m)
As JSOW
### Diameter (m)
As JSOW
### Weight (kg)
500Kg
### Ran…
-
RTKLIB cannot recognize the receiver antenna type from the observation header when we are using broadcast ephemeris. I have attached two output files of RTKPOST; only the ephemeris option was changed …
-
[The Adafruit I2C GPS we supported is now discontinued, and the new V3 is USB only](https://www.adafruit.com/product/4279).
We will have to:
1. Redesign our hat to support the new V3 (or whichev…