-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
In previous kernels the GPIO chip definition was "gpiochip0" for Raspberry Pi 4 and "gpiochip4" for Raspberry Pi 5. Now both are "gpiochip0" in latest kernel. Seatalk1 in Signal K is broken for Raspbe…
-
Hello,
Both **drivers/gpio/gpio_stm32.c** and **drivers/gpio/gpio_npcx.c** drivers are based on the gpio-controller DT structure, however since they use the raw GPIO_PORT_PIN_MASK_FROM_NGPIOS macro…
-
I was writing to suggest a feature that would allow for a new folder of videos to be played in random order when GPIO is pressed. If there is a way to modify the code to make that work then I would ap…
-
Hi everyone,
I'm trying to read what is written in SCAN register after doing the reset and the init. Then I'm sending the value to a Python program that displays it. I'm getting the right exadecimal …
-
The install was attempted on what was essentially a fresh install of Debian 11 Bullseye on an OrangePi Zero 2, after a restart and updating with apt update and apt upgrade.
Followed the instructio…
-
Can you help with what this means exactly?
When trying to use GPIO 34 or 35 .... other pins work fine.
```
19:57:38.109 -> 35 (outlet) -> switch: off
19:57:39.099 -> E (76189) gpio: gpio_set_…
-
Hello!
Device: Pi4B 4GB
PiJuice Firmware: 1.6
OS: Raspbian GNU/Linux 10 (buster) from official RetroPie image
Architecture: armhf
My problem is, tht I cannot get the Pijuice to charge from US…
-
`In file included from c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\MCUFRIEND_kbv.cpp:38:
c:\Users\\Documents\Arduino\libraries\MCUFRIEND_kbv\utility/mcufriend_shield.h: In function 'void writ…
-
Can you explain a bit on 'any GPIO pair may be used. It is important to note that both D- and D+ MUST be adjacent.' ?
Is it means GPIO12 and GPIO13 (D-, D+) will work, but GPIO12 and GPIO14 (D-, D+) …