-
-
I successfully connected srsue to srsgnb via zmq
```
Attaching UE...
Random Access Transmission: prach_occasion=0, preamble_index=0, ra-rnti=0x39, tti=814
Random Access Complete. c-rnti=0x4601…
-
Hi,
I'm trying to install 5gs on k8s cluster which is on ubuntu 20.04. building gtp5g was successful with kernal "5.4.0-159-generic"
In values.yaml, I've modified eth0/eth1 with ens33/ens34 inte…
-
Hi,
I'm currently working on an open-source gNB/UE Simulator which can act as 5G Core stress tester to evaluate the performance of the 5G Core, called [PacketRusher](https://github.com/HewlettPacka…
-
- [x] Try to connect eUPF with OAI in docker-compose
- [x] **Find out how to configure OAI SMF connection to UPF (!)**
- [x] Compare signalling messages with and without eUPF
- [ ] Research OAI site,…
-
## Issue Description ##
Hi all,
I'm just starting out to establish an LTE network using srsRAN but I'm facing a problem when connecting eNB to the core network.
I can't get my srsENB and srsEPC …
-
## Issue Description ##
Hi,
I've used SRSRAN in the case that both EPC+RAN were in the same Machine or different machine but in the same LAN network. there was all well.
So then i decided to Use …
-
### Open5GS Release, Revision, or Tag
v2.6.0
### Components and subsystems
SMF UPF 5G
### Proposed functionality
I propose a functionality to UPF selection with same RAN config.
According to th…
-
Hi,
when clearing the checksum offload flags, it should keep VLIB_BUFFER_IS_TRACED for vpp trace plugin:
```
diff --git a/upf/upf_forward.c b/upf/upf_forward.c
index 585c91e..34581a8 100644
…
-
## Issue Description ##
when using PRACH short codes below Error appeared after start up
==== gNodeB started === │…