-
Issue:
When pausing and/or skipping there is a piece of audio repeated straight after the action. This is very audible and sounds like a glitch. The piece of audio lasts like 0.5-1.0 sec.
Replicat…
-
Hello to everyone.
Rivendell version: 3.2.0
System: Raspberry PI 4
I have connected to raspberry pi 4 USB sound card.
Sound card itself is recognized by the system, everything is OK.
But in Riv…
-
I can use alsa command
```
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplusadcpro], device 0: HiFiBerry DAC+ADC Pro HiFi multicodec-0 [HiFi…
-
**Describe the bug**
Im not able to connect my Pi Zero W 2 to the WiFi. The Pi does not create an Access Point, adding a wpa_supplicant.conf did not work (manually or with the Pi Imgager Tool). I was…
-
Because of differences of speakers and volumes, it is desirable to be able to equalize clients.
I am willing to prepare a pull request to realize this feature. I am also wondering if you are willin…
-
Hello, after installing touch display plugin in volumio I have no more sound from my dac (x5000 with hifiberry dac). Card is correctey detected but Sink is always in SUSPENDED mode. No sink inputs.
D…
s1m00 updated
6 years ago
-
**Describe the bug**
High pitched 2 to 3 second tone intermittently plays after pausing music. I was able to reproduce this somewhat reliably using the steps below. When I get a chance, I will also t…
-
I can't find any means of refreshing / filtering / pulling the plugins list.
I have 1 RPI 2 + hifiberry amp i intend to setup as a snapcast client.
I run a VM with the volumio x86 build that i int…
-
Hello
Can anybody tell a noob like me tell me how to switch gpio in crankshaft ?
when i write in gpio2kbd.cfg "nextsong 12" it does not work when i put a cable from ground to gpio 12 / pin 3…
-
### What happened?
Installed latest dev version and connected to MQTT server
Sending [mqtt topic]/remote play etc does nothing, I see nothing in the logs of shairport-sync confirming that it is proc…