-
g++ -lstdc++ -gddb -m64 -L /home/dell1804/refer/ws_carte_impedance/build/kuka_lwr_hw/reflexxes-prefix/src/ReflexxesTypeII/Linux/RMLPositionSampleApplications/../../Linux/x64/debug/lib/static -L /usr/l…
-
This is a specific error report:
./sound/soc/codecs/sdm660_cdc/msm-analog-cdc.c: In function ‘msm_anlg_cdc_mbhc_calc_impedance’:
../sound/soc/codecs/sdm660_cdc/msm-analog-cdc.c:716:41: error: this…
mzb98 updated
10 months ago
-
User reports:
I noticed that the sample rate must be set to “30.0 kS/s” in the OE FPGA Acquisition Board in order to measure the impedance. If I change the sample rate to any other values, the RHD200…
-
-
Not a issue, just a doubt.
I'm building my board, is necessary pullups resistors on the inputs ?
Thanks.
Regards,
Reinaldo de Souza
-
It would be nice to define a normalized impedance and zoom left to enlarge a region of the smith chart.
![image](https://github.com/scikit-rf/scikit-rf/assets/138145542/5ed08034-92e2-46ec-bee9-e3ba…
-
Hi!
I have designed a Board based on the documentations available at Analog devices website.
I dont use ADICup3029 Board, I am using NUCLEO-F411RE.
I want to use AD5941 to measure Battery Impedance…
-
Initial spec:
- 32:2 mux that allows continous impedance/continuity/crosstalk measurements of the entire chain from Fastino down to ion trap using VNA/Impedance meter without disconnecting from Fasti…
-
add export for 3winding transformer
-
I have tried to simulate a stripline whose characteristic impedance (Z0 = 14.75729574 Ω) can be calculated analytically, but the simulated S-parameter values do not make sense.
I followed the example…