-
Hello,
I'm not very good at this stuff, but I think the current [variant.h](https://github.com/technoblogy/serpente-core/blob/master/samd/variants/serpente/variant.h) file lacks the configuration n…
-
When trying to run this using Hardware SPI (SCK and MOSI), it doesn't appear to be working at all as in none of the lights do anything. I was able to run just fine on the Raspberry Pi using Hardware S…
-
This request is a result of a support topic in the forum under https://forums.adafruit.com/viewtopic.php?f=60&t=187178
And also relates to the issue: https://github.com/adafruit/circuitpython/issues/…
-
For the next generation PCB, we're looking at switching away from the Atmega328p, since it is becoming too small for future additions (see also #2). This issue summarizes some of our previous consider…
-
### Operating System
Others
### IDE version
Arduino IDE 2.3.2
### Board
Adafruit ItsyBitsy M4
### BSP version
1.7.13
### SPIFlash Library version
4.3.4
### Sketch as attached file if not sto…
-
CircuitPython 8.0.0-beta.6
Board - Adafruit Feather ESP32s2
Error message:
```
You are in safe mode because:
CircuitPython core code crashed hard. Whoops!
NLR jump failed. Likely memory corrup…
-
Hi, I am working on the files for the adafruit grand central. The board is already on my local makecode. I can do a new project with it and the simulator works fine (for example when I program the neo…
-
Hi,
The implementation for the samd servo library doesn't work on samd51.
The syncbusy bit and clock management are different on this new chip so the code [here](https://github.com/arduino-libra…
-
Basically the same problem as this when running hello_LoRa.ino
https://github.com/adafruit/TinyLoRa/issues/23
I'm using RFM95 on a M0 arduino (however non adafruit), and I know it worked twice (c…
-
Hi, thanks for the working on this)
Please provide examples for microcontrollers if possible.
Thanks
EDIT: see below https://github.com/2bndy5/CircuitPython_Cirque_Pinnacle/issues/4#issuecomment…