-
Problem: .svg files from the _master branch_ located in the _corne-classic/case_ folder are incorrect size (scaled down).
I've detected the issue in the corne-classic-tent.svg and corne-classic.svg f…
-
I've been trying to figure out if it would be possible for me to implement this feature. Some Chinese cutters I've used have been able to take a non vectorized PDF file and figure out how to print fro…
-
VisiCut Version : 1.9-141
Operating System MacOS: Monterey 12.2
System: MacBook Pro (M1)
LaserCutter: LAOS based.
I am trying to calibrate my camera. Installed VisCam successfully. I am gettin…
-
Hello,
I recently had problem with my laser cutter for ip address network issue which is connected via lan to my wifi router. So in order to avoid them I have assigned a reserve IP address in my ro…
-
Looking at this feedrate issue it looks like these calculations of the trapezoid are different in the newer version:
https://github.com/CCHS-Melbourne/LaserCutter/blob/master/Marlin/stepper.cpp#L318
-
Hi !
I upgraded Visicut from **1.9-102** to **1.9-142** version then I saw in all my new generated gcode files that the power setting is only set to 100% (if above 50%) or 0% (if below 50%).
For…
-
Put all interface (microphone, speaker, keyboard, PTT/F1/F2 buttons, rotary encoder, Kenwood connector, OLED display) on a separate board.
-
Is there a way to adjust the timing of the spindle pwm output? I would love to delay it relative to the motor signals.
I don't actually think this is an issue with the grblHAL code, but I'm pulling…
-
Using Visicut 1.9-113-g02234deb.
Issue:
Raster Engraving jobs are smearing as S-Setting is incorrectly left high when it should be set to 0 for blank pixels.
Same template as before:
Initiator…
-
Hi,
some of our users have a problem which boils down to LAOS TFTP server not correctly working with apache commons-net TFTP client.
See here: https://github.com/t-oster/LibLaserCut/issues/131
It s…