-
### Problem Description
I used the WiFiAccessPoint example and I couldn't find the network using both laptop and mobile phone.
I tried to run the WiFiScan example to check if the hardware is worki…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Hallo,
wenn ich versuche über Plattformio einen D1 Mini Pro zu flashen (egal ob 0.5.0 oder 0.4.9), Startet dieser nach dem Flashen nicht.
Nach dem errechnen und anpassen der Monitoring-Baudrate bek…
-
Hi,
sorry I'm new to Arduino and programming. Compiliong the sketch in "Pixel mode" everything goes fine but when compiling in "Serial mode" I've got this:
Arduino:1.8.8 (Windows Store 1.8.19.0) (…
-
Hi Steph,
I made an espboy on a breadboard with a (clone ?) nodemcu module and this screen:
I got the appstore v2 to work and every software that uses TFT_eSPI lib seems works fine too.
But e…
-
Hi there,
I'm attempting to get my Wemos D1 Mini Pro working with your bed sensor scripts, however after flashing both files I'm getting reboot errors.
I modified config.h to suit my config, sh…
-
### Describe the problem
I get an unexpected popup just after selecting a board:
> **The "xcrun" command requires the command line developer tools. Would you like to install the tools now?**
>
…
-
Arduino IDE 1.8.12
Esp8266 Framework 2.7.0
ESP8266MQTTClient 1.0.5
Run Sample MQTTClient.ino
```
#include
#include
MQTTClient mqtt;
void setup() {
Serial.begin(115200);
// WiFi.beg…
lable updated
10 months ago
-
### The problem
Full discussion thread at:
[https://community.home-assistant.io/t/cwww-light-reboots-when-set-to-midrange-due-to-watchdog-timeout/488784](url)
cwww lights running ESPHome which re…
-
Hi,
i tried to test the sketche but here is the result :
Button 1 down
Buttons up
Button 1 down
Buttons up
Button 1 down
Buttons up
Button 1 down
Buttons up
Button 1 down
Buttons up
But…