-
**Actual Behavior**
Adafruit FRAM I2C driver start renders the detector firmware application to be freezed while LMIC driver (LoRaWan RFM95 module driver) is in operation.
**Expected Behaviour**
…
-
When I set up RGB OFF it stops with "-> Enter state Measure".
My setup is Cube Cell, HX711, DHT22, no One-wire
I have tried to set "#define THERMOMETER_COUNT 5" to "0", but then the compilation fai…
-
I have a setup consisting of a Dragino LoRa HAT on a Raspberry PI 3b+, and two Arudino MKR WAN 1300 devices. After installing and running the dual_chan_pkt_fwd software, the gateway was successfully r…
-
Currently there are special functions to scan for devices on serial and can ports. In my case the devices are connected by SPI. So I would have to add another special function and do some code duplica…
b0661 updated
3 years ago
-
Hi,
I like to signal the following bug in the web ui for the rest api.
If I use it, I get this error:
```json
{
"code": 16,
"message": "authorization metadata must in format 'Bearer ",
…
-
#### Summary
Retry failed confirmed downlinks
#### Why do we need this?
To ensure same behavior as v2 and make customers happy
#### What is already there? What do you see now?
…
-
LPP is used by Wazigate through ChirpStack as payload encoding for LoRaWAN sensors.
The binary payload is very slim and fits very well for low-memory devices like the Wazidev.
See https://communit…
-
## Description
This PR summarizes the on-going efforts to provide a uniform experience when switching between different network stacks.
With this we should be able to:
- Have the same support f…
-
In a physically-reconfigurable device such as those based on the Hardwario Tower kit, it would be advantageous to have the possibility to replace the LoRa modem module without the connection to the Lo…
-
### Project:
Breakneck Ridge Initiative—Open Source and Free to Use Hiker Tracker Platform
### Elevator Pitch:
Breakneck Ridge trail in New York is a very popular destination that experiences…