-
### What happened?
If the temperature goes under 0C the values are not corretly parsed. It looks like an error in number representation.
Current temperature is around -4 °C but it shows 6550.9 °…
-
A json array with plain numbers is expanded incorrectly.
16:13:17.402 MQTT IN: go-eCharger/221889/nrg: [229.71,2.17,2.17,3.72,0,0,0,0,0,0,0,0,0,0,0,0]
16:13:17.403 Expanding json message
16:13…
-
Hello there, i installed plugin, but i dont see any setting after opening it. Tried to reinstall but nothing changed. Any fix for it?
If I start the adapter I get "Wrong device type" but I am able to at least start and stop the device with the following calls:
miio protocol cal…
-
Hello!
Would it be possible to also read meters with OMS protocol? (https://en.wikipedia.org/wiki/Open_metering_system)
Specifically OMS 3.0.1 Standard Mode 5 with AES encryption
that would be pe…
-
Guten Morgen!
Hatte gestern mal wieder einen Stromausfall zuhause und danach ein kleines Problem mit dem AhoyDTU.
Und zwar, der AhoyDTU ist mit einer letzten gemessenen Leistung von 42W ausgefal…
-
Hey everyone,
since I recently started working with eBus and the Wolf heating systems, I would like to post my findings / how far I got and how I got there (for everyone looking to get started).
*…
-
Everything was working well, but since some times, the script was not working.
I had a look and sens it fail because cookie expired and a captcha was required. So I made an update of the cookie and t…
-
Hi Sven,
great to see that you've improved your old Tripower-X-MQTT script. I would like to integrate it into our LoxBerry project (for Loxone Smarthomes): https://wiki.loxberry.de/
How should I…
-
#### Required Information
- DietPi version | `cat /boot/dietpi/.version`
G_DIETPI_VERSION_CORE=9
G_DIETPI_VERSION_SUB=6
G_DIETPI_VERSION_RC=1
G_GITBRANCH='master'
G_GITOWNER='MichaIng'
- Di…