-
## Expected Behavior
The modem is detected via lsusb and serial ports are created (ttyUSB0-3) and it should be possible to connect via MBIM protocol and ModemManager. The modem is in USB mode (normal…
-
Error building the firmware image
Server response: Unsupported profile: glinet,gl-mt6000
Please report the error message and request
Request Data:
{
"url": "https://sysupgrade.openwrt…
-
Error building the firmware image
Server response: Error: Impossible package selection
[Please report the error message and request](https://github.com/openwrt/asu/issues)
Request Data:
{
…
-
Luci error:
>Error connecting to upgrade server
Could not reach API at "https://sysupgrade.openwrt.org". Please try again later.
SyntaxError: JSON.parse: unexpected end of data at line 1 column 1 o…
-
### Describe the bug
Since commit fb45887e85ca42c95f80fb9a3147d98b3edc7724 (mac80211: update to 6.6.15), ath10k_pci fails to load for ath79 target (Specifically Devolo dLAN pro 1200+ WiFi ac) with …
-
*sinancetinkaya:*
Supply the following if possible:
- Device problem occurs on
root@OpenWrt:~# cat /etc/*-release
NAME="OpenWrt"
VERSION="SNAPSHOT"
ID="openwrt"
ID_LIKE="lede openwrt"
PRETT…
-
### Describe the bug
When attempting to create an ssid bridged to a vlan-tagged lan interface, Openwrt does not forward the traffic received to the wifi interface.
Traffic from the wifi interface …
-
### Describe the bug
So steps to trigger this bug.
1. Use make menuconfig to set up a X86 build.
2. let it build
3. After the build is dun open Kernel_menuconfig and close it with out changeing…
-
### Describe the bug
Since ~May, MT76 has had an issue where a single radio running (1) 802.11s node and (3) or more VAPS causes any STA's max receive bandwidth to be limited to 20MHz.
Remove the …
-
### Describe the bug
I attempted to set two Dnsmasq instances with a separate DNS on each instance with one DNS spanning both interfaces with an alternative port so I could create rules to force cl…