-
- basic mainsail control using allowed angles for hing
- Rudder control
-
Hello
Is it possible to implement a Take_Frame_By_LayerChange without creating the gcode in the slicer every time. RepetierServer also recognizes a layer change. The GCode layer is also displayed in …
-
Hi,
This isn't correct, Cura2Moonraker isn't required as you can use Post Processing Scripts out of the box. https://github.com/mainsail-crew/docs/blob/6a8e373f888931abeca0e4f09637dfc416669f32/feat…
-
**Is your feature request related to a problem? Please describe.**
I'm considering using an ultrawide touchscreen with my printer but it doesn't seem like KS has an option to support ultra wide screen…
-
This issue is to track and not forget about this.
Goal is to be able to quicly find out the max flow for every hotend and every material you have with only a click in Mainsail/Fluidd
-
Terabot - 644 -- Motion --- 9/21/2023 16:38:53
Mainsail Version:
Moonraker Version:
Klipper Version:
Issue Condition: Configuration
Issue Details: TerabotX build volume in Y is approximately 100…
-
How feasable it would be to compile this to webassembly (leaving GUI aside - i.e. compiling only the core/backend)? Additional GUI in JS would have to get written.
This would setup a path which lea…
-
### Is your feature request related to a problem? Please describe
no
### Describe the solution you'd like
will be more comfortable and can also prevent unwanted clicks
![צילום מסך 2024-09-06 08590…
-
i am installing this on mainsail os and after i did everything on the page i got stuck on run.py
terminal log
DWIN handshake
DWIN OK.
http://127.0.0.1:80
Waiting for connect to /tmp/klippy_…
-
## Version of the moonraker integration
1.3.4
## Describe your setup
Klipper, Moonraker, Mainsail, Raspi.
Relay connected to the GPIO on the pi to control power to the printer board (SKR m…