-
Hi,
I've tried to enable the deep sleep condition on the Edge Control Board, but the results are bad and not different from the normal sleep function: the board consumption doesn’t fall under 3 mA,…
-
Hello, I'm working on a project using this board, is it possible to have the source code of the bootloader? Is it a Bossa bootloader, right? I would like to implement a DFU mode like the Nordic bootlo…
-
Hi all,
First of all THANK YOU for... like... everything you do! 🤗
Regarding the:
https://docs.arduino.cc/tutorials/nano-rp2040-connect/rp2040-ap-web-server-rgb
Is there example/plan regard…
ams1 updated
6 months ago
-
## Problem:
STSTM32 use the last toolchain gccarmnoneabi package (1.90201.191206) to build MBED framework (and surely others).
I never had problems with that, until recently playing with STM32G…
-
Hi How to implement a wear leveling file system for NOR serial flash? is Littlefs better way? if yes how to use littlefs to create a filesystem?
-
Hi All,
Found a bug experimenting with the Sparkfun MMDLCB with v2 of the Apollo3 Core.
Issue: Essentially, when disabling onboard LDOs, I measure an increase in current consumption, not a dec…
-
### Description of defect
Inability to enter sleep mode (or at least reach expected sleep mode average current) after calling
`static LoRaWANInterface lorawan(radio);` when working with NRF52…
-
Hi @PaulZC ,
I have been using the global tracker quite a bit (not for balloons, but other applications), and suggesting these to several people around me. I think everybody is very happy about it …
-
https://github.com/AVSystem/Anjay-mbedos-client/blob/master/README.md refers to an optional sensor board IKS02A1. However, the actual .lib file pulling in the drivers is meant for [IKS01A2](https://gi…
-
This issue is related to https://github.com/ARMmbed/wifi-x-nucleo-idw01m1/issues/17
When I run Greentea netsocket and WiFi tests and the hardfault happens, IDW01M1 may end up to a non-functional st…