-
-
## Issue template
- Hardware description: Teensy4.1 or i.MX-RT1060 MCU
- RTOS: No
- Installation type: Arduino IDE or MCUXpressoIDE
- Version or commit hash: humble
#### Steps to reproduc…
-
In the Teensy 4 sources, the code that initializes the FLEXIO2 peripheral configures an invalid clock setting according to the IMXRT1062 reference manual. I'm curious if this setting is intentional an…
-
1. 这里可以comment 平时看到的好玩的东西,觉得比较有趣的东西,一定要提供链接。
-
# The setup
Using the `EVK MIMXRT685` as `I2S` SLAVE configured as:
- TDM / DSP mode A (mono)
- 48kHz (SCK at ~25MHz)
- 16 slots (channels) per frame
- 512 SCK per frame
- 32 SCK per slot
- 3…
-
Standalone project is self-contained project with all necessary files for build in single folder.
This folder could be transported in form of archive and used in another machine.
-
I am working through steps to add additional boards. I added branch
The LPC55S69 is currently supported in the ISSDK. So files required exist in other SDK releases.
I have worked through the imme…
-
### Description of defect
A runtime assertion happens on FRDM-K64F when assigning a pin name as "NC". Specifically this happens on BufferedSerial() when assigning the Rx pin to be NC. This is…
-
Amit and I discussed using this solution for the same sensors that are on an evk board.
The evk should show existence of sensor. (ss_* is Shield board; bb_* is base board)
This actually shows the…
-
### Operating System
Linux
### Board
n.a.
### Firmware
n.a.
### What happened ?
I'm trying to package tinyusb for inclusion in Debian. I was thus reading through all the copyright of the includ…
josch updated
6 months ago