-
DoD:
- [x] Display the values from the sensors(MLX90614 and HTU21D) by changing temperature and Humidity Levels on Arduino Uno Board.
- [x] Read the temperature values from the sensor after inter…
-
I tested two modules with 3 boards, I get the same readings:
I added 10nF cap between T- and T+, and in one board, I cut the connection between T- and gnd
20:47:19.425 -> Status: STATUS_OK
20:47:…
z01ne updated
2 years ago
-
Attiny1614, 20MHz internal, 5V, pullup 4k7 on SDA,SCL, serialUPDI 230400 CH340 Win
Unable to communicate with mlx90614 sensor via i2c.
I tested with the Adafruit_MLX90614 library and also tried my…
-
Hi @smuellerDD, Please forgive maybe the mistake of opening an issue here.
I am stuck on GRUB boot after I enable LRNG on OpenWrt x86_64 Linux 6.1.47.
LRNG Version: v50
Patch Files: https://git…
-
### Hardware:
Board: ESP-WROOM-32 (ESP32_DevKitc_V4)
Core Installation version: 1.0.1
IDE name: Arduino IDE
Flash Frequency: 80Mhz
PSRAM enabled: …
-
I think this is a bug ,
when i have both sensor connected either in the same i2c port or different i2c on the same mcu, the gyro does not return any value, it only display 0 for all 3 value which in …
-
EDIT: PROBLEM FOUND
line 118 of wire.cpp checks if i2c_read(...) returns zero, and discards the data if it does not.
i2c_read(...) in Dev2C.h, does not return zero on a successful read. It will…
-
**Describe the bug**
Takes so much time to launch and load sketches that you allmostly forget what have you been waiting for, the load time is really too long in compare to the old IDE.
I have an …
-
After the latest source & Custom.h changes I am not able to compile the Custom firmware using Vagrant anymore.
The compilation log ends with:
default: Compiling .pio/build/custom_IR_ESP8266_4M1M/F…
-
DoD
- [x] Order for Sensor MLX90614 Placed on Amazon.com
Blockers
- [x] Waiting for Order Delivery