-
The hardware has three neopixels(WS2812B) connected to pin 12. They are useful for showing pressure data visually.
Currently, the neopixel library is included in each example that uses them and ne…
-
When doing SubBlade, specially when you have an illuminated PCB for NPXL, the GRB order, and even the a white channel might not be the same for the PCB and the Blade. So, if you could specify the RGB …
-
Hello,
I am attemting to use this library for driving NeoPixel LEDs. I notice that the .c file has a uBitPinMap, that maps to 3, 2 and 1. However I am unable to get this to work.
This is the c…
-
loaded stock code for esp lxdmxwifi example and in AP mode im getting hard reset and WDT error on reboot
-
Hi. I spend few days now trying to get the RGB porst to work with no sucess. I try diferent RGBW and still no go. I'm using klipper and the code I'm using works on any other printer but not on the …
-
Possibly for use in #12, we should film a short video of opening up an old PC and pulling out the power supply to use with a MBGL board.
-
Hi Niklaus
Thank you for this library, I have lot's of fun with it, trying to get a 12 segment Neopixel Ring running. First I figured out how to do it with the Python library and now I have an issu…
-
**Describe the problem you have/What new integration you would like**
I'd like it if ESPHome could support FastLED and/or NeoPixelBus on the RP2040 board
**Please describe your use case for th…
-
I am getting semi-random glitches in the RMT output. I am trying to use it to drive Neopixels and I get wrong pulse lengths sometimes. The glitches occur less frequently when I have longer delays betw…
-
Same code is working on ATtiny85 but not working on ATtiny45: https://github.com/moononournation/NeoPixelHexPendant/blob/main/NeoPixelHexPendant/NeoPixelHexPendant.ino
I know memory is an issue, but …