-
Although there is support for the AdaFruit Monochrome 128x32 SPI OLED Graphic Display the I2C version isn't supported:
http://www.adafruit.com/products/931
Support is needed for the use of the I2C v…
-
I'm trying your drive on MT7628AN (MIPS24KEc, little-endian) running OpenWrt master. Somehow the pixel order is wrong. When I write 16 bytes to /dev/fb0 I'd expect that being the first 128 pixels, ie.…
-
**What's the full name of the component you'd like to see in Adafruit.io WipperSnapper?**
The full name of the specific component.
ssd1306 Oled
**What type of component is this (i.e.: Pin, I2C)?…
-
No matter what I do the gps doesnt communicate with the arduino nano. I know the gps has a lock, because it has a red blinking light when it establishes a lock.
-
Can anyone help me to add two switches and an oled 0.96" so that it shows the temp and humidity in the first sample temperature, humidity. I am new to coding and want to learn new things. I would be t…
-
Hi,
I'm using the Library with Arduino pro mini and ESP8266 and an OLED-Display 128x64.
Everthing works so far and now I want to put the Display off over night and on at the beginning of the next …
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…