-
What do you think about the option to add the syslog.h to the project?
In such a case you could debug the device if it is not more connected via serial.
Updating via OTA is working fine - a log vi…
-
Hi there, I bought the Bresser ClearView station (https://www.bresser.de/en/Weather-Time/BRESSER-WIFI-ClearView-Weather-Station-with-7-in-1-Sensor.html) and had a Firebeetle 2 (not 1) lying around (ht…
-
Before submitting a problem please check the troubleshooting section
https://docs.openmqttgateway.com/upload/troubleshoot.html
**Describe the bug**
After setting rawEnabled, the command failed.
…
-
Hi,
I like the idea, but in my case it is not working. Not pairing.
Is there a way to debug or get some help.
I have a LOLIN32 and C1101 and spi connection is good also the requeired parking hea…
-
Hello,
I'm trying to build with platformio from the [env:nodemcuv2-all-test] environnement with adding LORA function.
I've just added the following :
lib_deps =
${libraries.lora}
…
-
BM2 decoder fails to decode this "BM2 Monitor": https://www.amazon.de/dp/B09MJ4PL72 using OMG heltec-ble with [decoder @5f7dca59d5cfe14d4b45f7f44d5797f455e8638d](https://github.com/theengs/decoder/com…
-
Devices like the LILYGO LoRa32 display the MQTT message on their internal OLED display.
The corresponding code in `ZdisplaySSD1306` hard-codes a 2 second delay to allow the message to display.
I b…
-
I tried to get the older version of the 433mhz lora heltec working. The board name is heltec_wifi_lora_32. I seems not to detect anything. Do you have any idea what i could try?
```
[env:esp32_hel…
-
Hello! Thank you for this project! I was wondering if it is possible to implement the Honeywell decoder in this project? The source in rtl_433 is here https://github.com/merbanan/rtl_433/blob/master/s…
-
Hi,
I have BTH-01 sensor, and I flash it with latest firmware THB2.
But ad-packets contains only RSSI info...
```
Advertisement received.
Device Name: BTH01-FD2387
Device ID: **ID of the devic…