-
Hi Ramon,
Thanks for the great effort and value you deliver for the community building these great APPS!
I use the Visonic app for years; it's awesome!
I have ordered the new OTGW from nodosho…
-
### The problem
I used OTGW integration for several years with no problems. Recently I tried to switch on the heating in my house, but the whole integration was somewhat flaky. There was a very small…
-
Hi, can someone give me datails about exact version of working 300w?
It seems that OpenTherm is not activated on mine :-(
Is it necessary to have the control panel connected on OT? Actually i have n…
-
Deze fout is ontstaan door een aangepaste integratie.
Logger: homeassistant
Source: custom_components/sat/climate.py:534
Integration: Smart Autotune Thermostat (documentation, issues)
First occu…
-
I had to disconnected my router for several hours few days ago and I noticed the gateway starts the public wifi after some time but reconnects if my router comes back online.
Are there any way to b…
-
hello sir, i have a brink wtw ventilation unit.(same as vitovent)
i have 2 otgw interfaces,
i first used off 1 otgw only the boiler part to connect to a arduino mega as a master with the opentherm …
-
From the log:
12:24:09.107921 T001A7FFF Read-Data DHW temperature (MsgID=26): 128.00
12:24:09.282683 B401A1520 Read-Ack DHW temperature (MsgID=26): 21.13
12:24:09.599133 T90383700 Writ…
-
My otgw is connected directly via serial, but it seems the config has a fixed `type tcp`. Would you consider adding an option to make that configurable?
-
I just tried to flash my d1 mini as described in the wiki.
When running the command as described:
`esptool -cp COM6 -cd nodemcu -cb 921600 -cf ino.bin -ca 0x200000 -cf fs.bin`
I get the following…
-
Hi and thanks for the great FW.
I use the firmware on a Nodosvop v2 with a PIC16F88 on PIC FW 5.0.1 and MCU FW 0.9.5+4eb7d24 (30-05-2022).
It's configured on a MQTT server that I run in a container …