-
```
What steps will reproduce the problem?
1. Start OZW e.g. with MinOZW and get the devices discovered
2. Unplug the USB Stick
3. Check with "top" and the MinOZW is consuming 100% CPU load
What is t…
-
When a device is included into the network it may send a node info request to the controller. The response is used to determine if the controller supports MULTI_CMD_CLASS so that the device can report…
-
```
What steps will reproduce the problem?
1. Start OZW e.g. with MinOZW and get the devices discovered
2. Unplug the USB Stick
3. Check with "top" and the MinOZW is consuming 100% CPU load
What is t…
-
As mentioned in this other issue, the embedded VNC version's resolution is locked at 640x480. This really limits the functionality of the embedded VNC version as you can't really see anything in the w…
-
If you refresh the node info on a device, the existing row in the node list will become blank leaving only the NodeID and a new row will be created.
You will be left with a ghost record (UI Only) u…
-
Hi,
After the recent update, self compile the version on 12 Jul 2019. All my NEO 2 gangs and 3 gangs switch missing its individual control.
Not sure anything wrong..
I attached my log file....Node…
-
Hi, how does one edit the config file for the homeseer WS200+ to read the scene changes inside home assistant?
-
Hi guys, I'm totally new to openzwave so I may be asking a silly question
here's my fibaro switch node:
```
node2: FIBARO System, FGS211 Switch 3kW
node2: name="", type="Binary Power Switch", loc…
-
The problem might be less scary than the title suggests, because this happened while I was debugging OZW, frequently starting and stopping, adding and deleting nodes and so on... It might not happen v…
-
```
What steps will reproduce the problem?
1. Fetch latest source (I'm using openzwave-1.3.1001)
2. Build using VS 2015 (and perhaps earlier versions)
What is the expected output? What do you see ins…