-
Hello dear.
In the video I saw the range for the radioID is 0-255 or the network in the example sketch, but when I downloaded and open the examples this information is not there. I want to know if …
-
Seems your board is no longer listed on Tindie after I bought one to test it. Are you not selling any more of them? If not, I just wasted my time as I don't want to spend a bunch of time trying to get…
-
Hello, I am attempting to send a message with the following structure:
preamble, sync word, and message
It seems that there are some unnecessary bits in the packet.
There is 1 bit before and aft…
-
Let's get the conversation started here on topics related to upgrading to a newer, better RF module...
I just recently received a couple of HopeRF RF69W 433 LoRa modules. Anyone have any experience…
csurf updated
6 years ago
-
It turns out that if the Device ID = 0x0000, every frame is treated as an ID frame because the CRC is good for all of them. In fact, a valid ID frame also has '00" for the low order two bits of the LS…
-
The ATMEL D2x series MCU seems like a good candidate for the MySensors MCU core because it is equipped with up to 256KB of on-board flash for program memory and 32KB RAM for data - the increased flash…
-
Hello @Phunkafizer,
I recently ordered your RFM69 ["Doppelmodul" from Seegel Systeme](https://www.seegel-systeme.de/2015/09/02/ein-funkmodul-fuer-den-raspberry-raspyrfm/) and am now trying to integ…
-
Hi,
in the PDF with the Feather M0 RFM69 pinout, the IRQ pin is wrong.
When looking at the schematic, I see that the IRQ should be on pin 3, a.k.a. PA09
-
when using rfm9x to transfer sensor data to another rfm9x to forward to AIO, I have observed something strange.
EDIT 4/14/2022
Throughout working this issue myself, I have found some interesting…
-
**Is your feature request related to a problem? Please describe.**
I'd like to use RadioLib to receive GFSK modulated messages with RFM69 and RFM95 modules.
Per its spec sheets, the modules should s…