-
hello,
i am a developer of [scikit-rf](http://scikit-rf-web.readthedocs.org/en/latest/), an RF/microwave module. within this module i have various VI's that have been written with pyvisa.
i rece…
-
**Describe the bug**
Adding a new IT8511A+ device results in segmentation fault
**To Reproduce**
Steps to reproduce the behavior:
1. Go to 'Add device'
2. Pick ITECH IT8500 driver
3. Selec…
-
*Sent by HJResearch (liam.hunter@hjresearchgroup.com). Created by [fire](https://fire.fundersclub.com/).*
---
Greetings,
Wish you all the best.
At HJResearch, we recently published a Prog…
-
This is somewhat interesting issue i think.
I know about issue #31 .
This is working perfectly fine:
1. connect the usb cable to computer
2. run: sigrok-cli -d voltcraft-vc840:conn=1a86.e008 -…
-
The current code is based on the SDK v3.1.1.2 lowPower beacon example, which seems to last on a coin cell for a couple/few weeks. There is also a git repo with a power optimized firmware here: https:/…
-
``Hello,
first of all I'm not really familiar with USB and TMC but with drivers.
I use a Rigol DS1054Z which is known to be somewhat limited in regards to downloading screenshots as it always chun…
-
蔡博士您好：
我的问题是这样。我目前想要使用matlab生成一个短暂的方波（如20KHz持续1ms 的方波），并暂停几ms到几十ms，如此作为一个周期，反复输出，通过matlab调整强度等参数。
因为我对这方面不太熟悉，目前还没有找到可行的方案。我尝试了一些其他人的生成任意波并输出的脚本，但最终显示在示波器上都失败了。如果您方便的话，可否留一个联系方式？
或者我的微信为：1768180745…
-
I can open a resource (RIGOL DM3058E, digital multimeter) using USB but I'm unable to get it's IDN.
The code:
import visa
rm = visa.ResourceManager("@py")
print(rm.list_resources())
inst = rm.open_…
-
I've written a few tiny bootloaders in AVR assembler, and am thinking of writing a USB bootloader. If there's interest in an optimized version of micronucleus in pure assembler for the avr25 architec…
-
Hi! I'm using the development version of pyvisa and pyvisa-py together with a Siglent SDS1104X-E oscilloscope via USB on Debian Linux Unstable. I'm trying to retrieve the channel 1 waveform from the s…