-
Add the option to regularly ping an IP and after x retries initiate a gpio pin down then up.
Use case is attach relay to GPIO and reset a device if the ping stops, could be a router or in our case,…
-
Currently the TULIP4041-DevBoard project is using the default USB VID (Vendor ID) and PID (Product ID) value.
While using the USB VID value of 0x2E8A is reasonable (we're on RPi's platform), using th…
-
I just tried and failed to compile on a pi4/64 any tricks? project still healthy? I see flagging -ludev ...
```
cm108.c:(.text+0x6b4): undefined reference to `udev_new'
/usr/bin/ld: cm108.c:(.tex…
-
### The problem
In newer versions of Raspberry Pi OS, the `raspistill` command has been replaced by `rpicam-still`, built on top of [`libcamera`](https://www.raspberrypi.com/documentation/computers/c…
-
Please make sure, the script works on rPi OS 12 64bit, the workaround I made is, to build the module on rPi OS 11 32bit.
The issue is, it cannot locate properly kernel-headers.
-
Pi4 2GB fresh Bookworm 64bit.
Hi, at some point, after starting the installation script, the terminal shows…
> Check plymouth installation ...
> Splashscreen: Checking themes directory.
> Spla…
lxne updated
20 hours ago
-
I was trying to use RPi.GPIO2, and found that the current instructions do not work anymore.
There are failures to install the pip requirements, and some of the code uses old, already removed, flags…
-
I have:
[rpi]
[mcu]
[mcu toolhead]
My MCU is an Octopus pro (1.1 h723).
Despite a successful flash, it always throws an error, which causes UKAM to stop without going ahead flashing the toolh…
-
Hello I want to try this system and ask if I can flash the rpi image on my radxa.
And is it possible to implement wfb ng like open ipc stuff ?
Thanks you very much.
-
Hello! During compilation i get the error "error: ‘FBINFO_DEFAULT’ undeclared (first use in this function)"
Log:
```
make -C /lib/modules/`uname -r`/build KCPPFLAGS="-I/home/mirko/seeed-linux-us…