-
Today I see the following on Sondehub
![sondehub_T1850595-k](https://user-images.githubusercontent.com/10279523/139294959-fc331f40-e8bb-40ef-a491-3e3a7b17e23d.jpg)
The last 3 positions
https://api.…
-
To address concerns with some auto rx stations uploading bad frequency information which was causing errors when we used the /sondes API to automatically import frequencies we now also upload the tran…
-
Hi. I'm trying to find how to read temperature and humidity directly from the sonde (custom firmware). In file rs41ptu.c I found function to calculate temperature (and humidity too). I would like to k…
-
Test extracted from #719. Originally derived from #715.
```
TEST(NVFuserTest, FusionEnsureMerging_CUDA) {
std::unique_ptr fusion_ptr = std::make_unique();
Fusion& fusion = *fusion_ptr.get();…
-
## 🐛 Bug
This is an issue tracking a failure identified by segmented bachnorm kernel.
## To Reproduce
```cpp
TEST(NVFuserTest, FusionBNRepro_CUDA) {
std::unique_ptr fusion_ptr = std::mak…
-
The estimated pressure calculation on
https://github.com/einergehtnochrein/ra-firmware/blob/f42df782498a040b144ce2f7d86413024b962fa9/src/rs41/rs41gps.c#L43
gives ten times the expected pressure for …
-
Hi,
The sondegate software appears to send packets at a **very high** rate to the APRS-IS. For example, here a single sonde is beaconing every 3 seconds **on average**, and this madness is amplifie…
hessu updated
2 years ago
-
Add a dropdown box on the top bar, next to the search box (or perhaps we can make use of the filter box somehow?) to allow filtering by radiosonde type.
Support for this kind of filtering also need…
-
**Describe the bug**
Scanner cycles between two active QRG entries with ID 1 and ID 2 but it displays Scan 13 and Scan 2 respectively when maxsonde is set to 11.
**To Reproduce**
Steps to reprod…
-
Some of the auto_rx receivers in scanning mode that are reporting to Sondehub seems not to have done frequency calibration and as such they are reporting the wrong frequency back to the Sondehub api.
…