-
Hello! I'm doing some tests with the ws5500 branch, does it work? What would be the pins used to connect my ws5500 board to the rp2040?
Thank you!!
-
**FPP Version and Hardware**:
FPP v5.3.1 (v5.3 branch)
Running on Kulp F8-PB
**Describe the bug and Steps to reproduce**:
The FPP instance is operating in player mode, but configured as a brid…
-
Transmitting through the NIC works with no issues. However, the moment I try to use PCap Playback an error occurs which states "Unable to open required interface". The same error occurs whether we use…
-
A hue lamp is not removed, when the bridge is removed. Furthermore, the lamp status is still ONLINE and won't even change, when sending a command to the bulb is answered with this log entry: "16:13:15…
-
From the webpage on SanDevices.com
_"Version 5.050 adds the following:
The controller IP address is displayed on the browser tab. Controller name field working (finally). POST tests
display hard…
scuba updated
1 month ago
-
What are the benefits of an updated DMX standard to already established open industry standards like:
Artnet
- UDP Unicast/Broadcast based
- Multiverse
- (somewhat limited) Device discovery
R…
-
With the [pigpio library](http://abyz.co.uk/rpi/pigpio/cif.html), it is possible to use a GPIO pin on the Raspberry Pi as a [bit-banged UART](http://abyz.co.uk/rpi/pigpio/cif.html#gpioSerialRead) inpu…
-
I upgrade Katharsis from 2.7.0 to 2.8.2 And I found below issue.
Katharsis cannot discovery repositories which there is no empty-argument constructor. Temp solution: Add empty-argument constructor …
-
I have been trying to use the Eurolite for a few weeks now, but no data is getting out of the device.
Ola-Log:
> Oct 26 22:25:25 raspberrypi olad[1786]: olad/PluginManager.cpp:200: Started Pathp…
-
### What version are you using?
```
stellar-archivist 0.1.1-6 amd64
```
### What did you do?
I started to sacn the Tier-1 archives and it failed due to panic in the code:
```log
…