-
This requires decoding of the Nissan::BatteryStatus message (0x1db) which we haven't decoded until now. The reason we need it is the current as none of the other messages have the current. It also has…
-
Pardon the narrative....
Ever since the earliest versions of SavvyCan / GVRET I had a problem with a non working EEPROM. I was very aware this had to do with my own hardware setup (just a Due with …
-
before to start the developement, I would like to know how to decode data received on the serial line.
I understood first char (the t) indicates the start, then 3 nibbles for identifier (3 ascii char…
-
**Observed**
In the current version of SavvyCAN there are two pain points related to the trace window and buffering of historical data:
If a user enables the 'Overwrite' mode, all historical data …
-
App keeps crashing on load file try i.e. load filter definition or DBC file. Seems related to loading some icons svg images from used theme.
(SavvyCAN:17091): Gtk-WARNING **: 10:57:02.137: Could no…
-
Not exactly an issue, however, I would like to suggest and recommend that you try to engage with the Home Assistant community to encourage a Home Automation "integration" (also referred to as "integra…
Hedda updated
4 weeks ago
-
The older GVRET firmware had the ability to forward traffic back and forth between CAN0 and CAN1. This firmware should allow for the same basic thing. But, this time it might be nice if the forwarding…
-
I've been looking around if it's possible to display text on the SID via I-BUS. Seems like it's been done on OG 9-3s.
Here is one resource on the I-BUS that includes a lot of I-BUS message info: ht…
-
Hi Timo,
first of all thanks for the great work. I am just getting started with the lib and question about the canID's.
I am using an ESP32 board with an MCHP2551 transceiver and an Microchip CA…
-
Hi, I have been trying to load PCAN View files, and then graph signals.
I have a log file with 100,000 lines, which will not import. EVER.
I have trimmed this to 100 lines, which will sometimes impo…