-
Hello!
Some times my application was very slow, and I noted that problem could be the write file slowing down the entire application. So I did a very simple example just writing file to demonstrate…
-
Hello!
Reading the MFRC522 data sheet, it seems like it supports several power-saving modes, including a "soft power-down" mode (http://www.nxp.com/documents/data_sheet/MFRC522.pdf). Is there a way…
-
### Describe the bug
The barometer value is increasing/drifting while simply sitting on a bench. This leads to drastically inaccurate altitude readings. For instance, when monitoring the sensors tab …
-
The text field is empty when running unfluff on the html from a New York Times story. For example, if I request a story from nytimes.com in the node console and then pass the page html to unfluff, the…
-
Hello Tertius,
First of all, thank you for your work and developing this software.
After managing to configure the MQTT server this is what I am getting when trying to connect to my control panel.
…
-
Sir, I see you mentioned that "We evaluate FIRMADYNE on a real-world dataset of 23,035
firmware images across 42 device vendors gathered by our system.
Using a sample of 74 exploits on the 9,486 fir…
-
# Storage Spaces with parity, very slow writes. Solved!
[https://wasteofserver.com/storage-spaces-with-parity-very-slow-writes-solved/](https://wasteofserver.com/storage-spaces-with-parity-very-slo…
-
### Summary
When I use the ansible.builtin.systemd_service module to enable the systemd unit /usr/share/systemd/tmp.mount, the module does enable the unit as expected but I always get the following…
-
-
Hardware: SAMA5D4Xplained dev board + ATWILC1000-SD (rev 4) dev board
Software: wilc_demo 15.2RC1 from:
https://github.com/linux4wilc/wilc_demo/tree/009b36048d18ffb64b2140eeecd0194cc21cbfd4
```…
HDC67 updated
4 years ago