-
### The problem
I am using a DS18b20 temp sensor via Tasmota. Home Assistant is failing to parse the ds18b20 device id value, which is a hexidecimal string but according to stacktrace (see below) i…
-
Hi!
Is it possible to add Bosch Sensortec BMP3xx series Pressure sensors in ESPEasy?
Sensors are BMP380 / BMP384 / BMP388 / BMP390.
Docs and Libraries:
https://github.com/boschsensortec/BMP3-S…
-
After my last issue reported here https://github.com/pvvx/ATC_MiThermometer/issues/286#issue-1535871659.
I have now configured an ESP32 Bluetooth hub with the following configuration:
```
esphome:
…
-
The printed version number of the motherboard is: B1.4
After replacing the temperature sensing chip with SHT3C waterproof type, the firmware is recognized as B1.6 after brushing in the custom firmw…
-
-
After flashing the Custom firmware. Temperature and humidity both show 0. E2 is displayed after restoring the original firmware
-
Is there an example of how to port this sensor in a stm32 processor.
-
Sensirion SHT4X Smart Gadget.
-
I seem not to be able to reconnect and open the config (e.g. for adjusting an offset) after having successfully flashed and used one of these. The flasher does connect, but just gives:
07:41:58: Sear…
-
Hi there,
Since 3 days I am using the QIngping CGDK2 sensors with the Firmware version 3.7.
One sensor is placed in livingroom, the other one outside in a "wind and rain protected" area below the ro…