-
I have a modlet from a power company's SmartAC program. Hacklet can control the modlet, but it can't connect or read from the thermostat. I've tried running commission while the thermostat is in pair …
ziegs updated
7 years ago
-
I got this thermostat working
`{
"type": "SimpleHeater",
"name": "Verwarming Slaapkamer",
"id": "xxx",
"key": "xx…
-
### Version
2.1.0_Win64
### Operating system type + version
Windows 10 pro - 64 bit
### 3D printer brand / version + firmware version (if known)
CR10s-5, Tronxy x4st-400, Ender3pro, Prusa i3m…
-
I'm working on a project that will be using BLE, and because the 8266 doesn't support BLE, I'll have to upgrade to a 32.
Using the below module, what will this add in terms of space required?
https…
-
In colder climates the printer (MK3) powers up and goes to error min bed temp. After heating the bed with a hot air gun it clears to hot end min temp and after a little heating so does the hot end. I…
-
As it is sometimes quite hard to find the next available Plugin-ID for a new plugin, this list is supposed to be updated by either me or TD-er once a plugin is planned.
If you are working on a new pl…
-
Hi,
last week i have noticed the integration has stopped responding to input the magiqtouch display wont update to the value i set in Home assistant, however if i set it on magiqtouch controll it wi…
-
Hi,
In the readme file you mention to use the various parameters to create switches and climate entries. I stumbled upon the following list on Nibe's website: https://api.nibeuplink.com/docs/v1/Par…
-
What about an integration for the
- ZigBee temperature sensor mini?
- radiator thermostat V2?
- read temperature
- control temperature
How could I support with data from the devices.
-
### Name
Dynaωo
### Screenshots
![DynawoInitiative](https://user-images.githubusercontent.com/38657764/147930434-41a47852-5771-493c-95dd-bebf7497df55.png)
### Focus To…