-
I have 4, with more coming... One for each solar controller and one for each of two battery monitors. So far I am using EmonCMS and EmonHub to record/log/graph data, and maybe able to help with mappin…
-
Board: ESP-DevkitC-WRover
Core Installation version: 1.0.6
IDE name: Arduino 1.8.13
### Description:
I'm trying to connect to a device (a Victron SmartSolar charge controller) to …
-
### Todo
- [x] Draw up a plan / specification
- [x] Add nodejs & node-red into Venus OS (done see below; not in master yet)
- [x] Add node-red on/off switch to gui; which starts and stops the nod…
-
Hi,
i tried to use the custom component with espHome but i have this warnig
![Immagine 2021-08-28 182627](https://user-images.githubusercontent.com/67467751/131224625-47cbfd4d-02db-4c05-a4fd-6583859…
-
Did a recent upgrade to one of my Raspberry Pi's to the latest version of NodeRed 1.2.2 and when you open a virgin browser window to port 1880 it goes through it's normal startup until it hangs on the…
-
**Current situation:**
Implementation per Solar charger type:
- Our Bluesolar chargers (Roys code stack) doesn't support custom names at all (and never will; code size limitations)
- Our Smartsol…
-
I'm running Node-Red on my rPi VenusOS which is connected to my Victron 150/100 Charge Controller and Battery Shunt. I created a flow to open or close the relay on the charge controller but noticed th…
-
-
Hi,
def read_data(self):
while True:
byte = self.ser.read(1)
packet = self.input(byte)
does not return any value. Is this correct?
Running: python3 vedirect.py --port /dev/ttyS0 …
-
xupc is the same as vup: a commandline tool to update firmware; but then for devices, connected to VE.Can, that have a xup bootloader.
- [x] Add xupc commandline tool to Venus - done in v2.30~27
…