-
**Describe the problem you have/What new integration you would like**
Please consider looking at using Sonoff ZBBridge as a WiFi-connected networked Zigbee serial adapter for projects like ZH…
-
### The problem
Hi ESPHome team,
I'm struggling to get the Sonoff Temp and Humidity Sensor THS01 (SI7021) working on the Sonoff TH Origin 16A (THR316D).
I used the yaml configuration of the So…
-
### Problem description
I have a TS0207 battery powered outdoor rain and light intensity sensor:
https://a.aliexpress.com/_EjJGdz9
The sensors are reported as a motion and open/close sensor. It s…
-
### The problem
Hello everyone ! (I'm new in the game)
I have executed the standard setup for an ESP8266 device via the ESPHome integration in Home Assistant. Despite a successful configuration p…
-
### What happened?
I initially set up Zigbee2MQTT using a Zigbee Dongle-E.
I successfully added a smart plug, and it was functioning correctly, including both control and status reporting.
I then u…
-
### The problem
I have updated 2 wemos NodeMCU to the new version and after that the devices went offline, I have hooked them up to USB and get the following logs. No change has been made to my wif…
-
Hi @Kristian8606 , I've checked your code to dim a led or, with the right hardware, a led strip.
I've tried to change it to control more than one led. The pwm library allows 8 pins max.
After tweaki…
-
After commenting the binary sensor for serial server the sonoff_zbbridge.yaml validated correctly with out any error but the compilation is throwing another error:
`
INFO Reading configuration /co…
-
Hi,
I appreciate all the effort you have made to develop these great plugins.
I have connected a contact sensor switch to the GPIO14 and GND of my Sonoff.
I established option 09 Switch1 through …
-
The first few times i got the connection, the temperature shown up at payload[0].rawMessageLastUpdate.params.currentTemperature ... , then it disappeared
before:
![cattura1](https://user-images.…