-
For example, the 1.0.5 version code can be used normally on my device, but the latest 2.0.1 can't work because there are more non-existent devices such as sx1261 and ADC ad338r. If I want to use the c…
-
Hi
There is a SX1261 transceiver connected to host via SPI. Does the code here handle that transceiver also ? I went through the code but didn't find any corresponding code here.
Regards
symov…
-
can someone explain the setMode function?
The SX1261 datasheet (page60/111) gives a illustration wich function is needed to set the chip in the wanded mode ..
like setSleep() (wich is implemented in…
-
-
Is there a certain button combination that puts the Evil Crow in programming mode? Every time I try to flash RFQuack, it fails.
-
**Describe the bug**
I use the NRF52840DK board with sx126x lora board,and then try to run **samples/drivers/lora/send**
But from the log, I can’t get any data from MISO, but everything else is norm…
-
Hello,
to start with I ordered and assembled the same Adafruit modules found on the photos on the RFQuack github site:
![494A5A58-01BD-43EA-80A2-702C1E1A7B7F_1_105_c](https://user-images.githubu…
-
Hi,
I am using a custom board with SX1262 with a SiLabs Gecko MCU and been successful in getting join/uplink/downlink etc. working very consistently with multiple units.
Now I am working on robu…
-
Good morning @beegee-tokyo @ivankravets
First of all, congratulations!
I have some questions
-have you plan to port to STM32 ? I ask you because i have a lot of LoRa modules here and they u…
-
Hi friends
I have been paying attention to your project! When I used the SX1261, I encountered such a problem: when the parameters are set, the CAD is turned on, and the CAD Detect interrupt occurs t…