-
When I try to deploy board borderrouter on ARTIK5 which running Fedora，Is it possible to deploy on ARTIK5?
-
Hi,
when I followed the steps showed in "https://github.com/openthread/borderrouter/wiki" and try to build the environment of border router on ubuntu(virtual machine) with cc2538(NCP), I can't open w…
-
I'm affected by the bug https://dev.openwrt.org/ticket/21654 and i reproduced it:
```
root@amora:~# opkg install ip-full
Installing ip-full (4.0.0-1) to root...
Downloading http://downloads.openwrt.o…
-
- IPv6 UDP checksum is getting set to illegal value 0x0000 while converting an IPv4 packet with UDP checksum 4051 (I have only seen it with 1 checksum value but multiple times). Below are the relevant…
-
Error compiling in Centos 6.8 2.6.32-642.15.1.el6.i686 #1 SMP Fri Feb 24 13:54:50 UTC 2017 i686 i686 i386 GNU/Linux.
[root@ mod]# make
make -C stateless
make[1]: Entrando no diretório `/usr/loc…
-
Running ip link show gives following output on my board:
1: lo: mtu 65536 qdisc noqueue state **UNKNOWN** mode DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00…
-
Hi,
I'm Starting the clatd and output of the command appears as below.
[root@localhost clatd]# clatd
Configuration successfully read, dumping it:
clat-dev=eth2
clat-v4-addr=192.170.1.182
clat-…
-
```
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-app-shadowsocksR:
* kmod-ipv6 *
* opkg_install_cmd: Cannot install package luci-app-shadow…
-
Hi,
tayga exists for NAT64 the next step is for totd to be packaged for DNS64.
Is this possible?
Thanks in advance.
NotBR updated
8 years ago
-
I am trying to create a test setup using CC2538DKs (as end nodes), CC2531 dongle, B…