-
Hi there,
I work with Attiny85 and I need to use other than PB0, PB1 softuart pins.
What command option should I use?
Thanks in advance,
Vladimir
-
This is more of a place to get the conversation started because I haven't 100% tracked down what is going on yet.
Here is what is happening.
I made a project months ago using 2.2.9 That project …
-
Does this library work with Attiny85-20mur? I need to use The pwm singnal on PB3 and the pin mapping image that this library is saying that there is no pwm on PB3.
The datasheet of Attiny85-20mur …
urkku updated
2 years ago
-
Working with arduino board 2009 with new Bootloader and shield for programming ATtiny 44/84 and Attiny25/85
Have problems during programming. Error which appears:
```text
Arduino:1.6.3 (Windows…
-
I have a sketch that use for year in a attiny85 without a problem (i use for control 50 ws2812b leds, with code usage: 99% flash 99% ram). I change with 167 for needing of more gpio and flash Memory. …
-
Hi,
I just tried to use the normal Adafruit neopixel lib with the tiny841 and for some reason everytime only pin 2(digitalpin 0) gets the data signal for the neopixel nomatter what pin i feed into th…
-
I have some Atmega8 chips. but i got this error when compiling.
c:/users/felipe rojas verasay/appdata/local/arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/../lib/gcc/avr/7.3…
-
I don't think there is *that* much that is unique about any one board that would require that much conversion effort...
We would use tiny, not tinymodern, as the tinymodern people were way too into …
-
Thanks for providing this information, circuit, videos and explanation at http://chaeplin.github.io/project-01-button.html.
It can detect the momentary switch while awake which is nice but as far …
-
README.mdの変更要請