-
### Is your feature request related to a problem? Please describe.
Actually I have dual Z drivers and invidual Max Z homing sensors. On Lerdge original firmware it's possible using the Ex-Axis functi…
-
So this is my current list of the things I'm planning on working on (in a very rough priority order)...
1. ~~Create single code base for STM/LPC versions and associated build system.~~
2. Track DC42…
-
I have connected the output of the hotbed to a SSR and the SSR dont work, because minus and plus are twisted. There are a labeling issue on the documents and pcb. See the picture: https://imgur.com/Kf…
-
Hardware SPI works fine using :
`TMC2660Stepper driver = TMC2660Stepper(CS_PIN, R_SENSE);`
using :
`TMC2660Stepper driver = TMC2660Stepper(CS_PIN, R_SENSE, SW_MOSI, SW_MISO, SW_SCK);`
doesn't wor…
-
Hello everybody!
After quite a while of searching for the "perfect" CNC controller board, I decided that Grbl on ARM is the way to go, but I didn't fall in love with a specific hardware. I have rea…
-
Just got the skr 1.4 turbo and have been pulling my teeth trying to configure it to work with my Ender 5 plus. The skr 1.4 has Z0 and Z1 in addition to E0 and E1. Z0 and Z1 appear to run off the same …
-
We bought a Palette 3 Pro in order to provide automated spool swapping for a large format 3D printer we're working on. This printer uses 1.75 filament, and we normally run it with a 1.2mm nozzle and .…
-
Any word of advice on interfacing trinamic drivers on board instead of the a4954 stepper drivers? This so stepper operation can be quieter.
-
Hi, i try to play around with a NEMA34 and the BIGTREETECH TMC5160T Pro board. It looks like i hooked up evrything correctly but i still cant get the motor spinning. I cant turn the shaft of the motor…
-
Hi,
just got my Octopus 1.1 and try to upload Marlin on it. But after connecting via usb board not detected by Windows (no new devices in Device Manager, any type), aslo not detected by STM32CubePro…