-
We shall support "Full Optimized – High Speed" TS mode
-
```
What steps will reproduce the problem?
1. Connect LTE modem Huawei K5150 to USB port
2. Set it in Ethernet over USB section and connect, check IP on WAN
3. issue reboot from console or WEB UI
Wh…
-
I'm at the hotel right now, and I can't use the android uploader to send to my laptop's perkeepd, because apparently my devices are on two separate sub-networks, and are not allowed to reach each othe…
-
```
What steps will reproduce the problem?
1. install 1.9.2.7-rtn-r5066 firmware (on RT-N16 router)
2. Plug in ZTE MF60 3.75g modem
3. Insert info (apn etc)
3. press connect at USB Network Devices-3G…
-
```
What steps will reproduce the problem?
1. install 1.9.2.7-rtn-r5066 firmware (on RT-N16 router)
2. Plug in ZTE MF60 3.75g modem
3. Insert info (apn etc)
3. press connect at USB Network Devices-3G…
-
I guys, I love the wz_mini_hacks however I have a serious problem, if the cam lose power, then most of the time will reboot in wyze pairing mode (red led blinking) so no RTSP available and basically …
-
It would be nice if we could use `gphoto2` as a client to manage midia on Canon T7. I'd like to help if possible, to implement the solution, I only need some guidance, I'm computer engineer student in…
-
**Hardware Environment**
- [X] Raspberry Pi 4
- [X] Synology with HA via docker container
## System Health
version | core-2021.5.3
-- | --
installation_type | Home Assistant OS
dev | …
-
I am working on a G scale layout that has CS3 as its controller. We are adding a second unconnected circuit and some storage loops for each circuit, plus train-on-track detectors, train position senso…
-
### Description
Hello everyone, i installed a virtual machine on windows computer to compile coralmicro sdk and i installed ubuntu 22.04.2 LTS operating system on virtual machine, coralmicro sdk is c…