-
# Custom Controller for Coolmoon RGB Fans | Jake’s Blog
Recently i bought some really cheap (about 7€ per piece!) RGB fans: They look pretty nice and come with a controller/hub and wireless remote, b…
-
It is good idea if your project will support HomeKit
-
**Hi,**
I'm writing down my steps and thought to show, how a "new user" (like me) approaches things on your webpage to get things going.
( _Please consider: I have 35 years of iT+programming experi…
-
### Hardware
ESP32
### Firmware version
V2.4.6
### Application version
V2.4.6
### What happened? What did you expect to happen?
Hi,
I'm trying to install the ESPSomfy software to a Wemos D1 …
-
### Summary
When setting the brightness of the main bulb to low values (apply() code to light_state.cpp so effects will work.
- I'm pretty sure this color issue also happens without any of this cust…
-
### What happened?
Simply updating to 0.15.0-b2 makes one of my panels no longer light up. I use GPIO 5 for panel 9 in a 2D matrix. Reverting back to 0.14.3 (or even 0.15-0-b1) fixes the issue. I use…
-
### The problem
I'm using the ESPHome Home Assistant with several different ESP8266 and ESP32 based devices.
After updating my devices to the latest version of ESPHome (2023.2.4), I've noticed some …
-
After trying basically everything on the web to downgrade & root my tv I finally found a working solution here (just translate with ur browser):
[Original Guide](http://webos-forums.ru/post158462.h…
-
### The problem
Since updating to 2024.7 the TP-Link and Tapo integrations are a mess. Most devices are working, but each integration has a hardcore few that fail.
Errors from each integration att…
-
Hey,
I use 120 WS2812 wit a 4A 5V power supply (limit 3800mAh). The firmware is 0.8.5 on two different ESP8266 boards. I want to use a self soldered ESP12E board with minimal space requirements. Wit…