-
## Issue Description ##
(1) Generating the custom block according to [Getting_Started_with_RFNoC_in_UHD_4.0](https://kb.ettus.com/Getting_Started_with_RFNoC_in_UHD_4.0) with the command: `python3 $UH…
-
### Background
This might be a duplicate of https://github.com/lightningnetwork/lnd/issues/5959, but not sure so I'll open a new ticket.
We have two LND nodes of the same version 0.17.2 (but lat…
-
Installation command
```pip install roapi```
Configuration file
```
addr:
# binding address for TCP port that speaks HTTP protocol
http: 0.0.0.0:8765
# binding address for TCP port that…
-
Hi, i am using Screen-4.7-S3 V2.3 2021-6-10 version of epaper. I am trying to i2c work but its seeing RTC address ( im assuming address: 0x51 ). However touch example and demo example for searching to…
-
I need a wiring guide for the arm. I have assembled the arm and wired it using this diagram:
![image](https://github.com/BCN3D/BCN3D-Moveo/assets/169725098/f3c7e698-a943-4a1d-a91e-edd8f1c4be79)
and …
-
### What happened?
After firmware upgrade to 3.1.0-1.0.7 by zigbee2mqtt the input switch 1 controls output 2 and input switch 2 controls output 1.
Prior to the upgrade input 1 was controlling outpu…
-
## I2C 成功发送后返回值不正确
### 代码
```cpp
#include
void receive(int a) {
Serial.printf("receive %d bytes\n\r", a);
while(a--) {
Serial.printf("%d \n\r", Wire1.read());
}
}
void set…
-
The aluminum wire recipe that's needed to progress anywhere with Galacticraft machines has been removed with no replacement.
Temporary workaround: Go to your instance's folder and open scripts\reci…
-
I'm trying to upgrade to Pi OS "bookworm" but the Monarco hat seems to have gone AWOL; both the 1-wire interface and the RTC are missing from `i2cdetect -y 1`:
```
0 1 2 3 4 5 6 7 8 …
-
# Describe the issue
After configuring the Zynthian to connect to a WiFi access point, I was not able to ping the device on the IP address shown in its Netowrk Info page. After connecting a wired net…