-
I have a simple sketch where I initialize one gamepad, mouse and keyboard. (attached)
If i try to use all three at the same time, mouse and keyboard send events, but gamepad does not.
If i switch …
-
I'm trying to add new certificate to my mlk1000. My steps were:
1) I've uploaded FirmwareUpdater sketch to the MCU with no errors
2) I ran winc1500-uploader.exe -address=*****.com:443 -port=COM4
3) T…
-
1) I'm using a 4460, but need to add an I2C device at addr: 0x50 where the Fram is located...
I see the FRAM8K driver and it has its address defined in the Mb85rc64ta.h file, so I can change it there…
-
I've downloaded the [breadboard-1-6-x.zip](https://www.arduino.cc/en/uploads/Tutorial/breadboard-1-6-x.zip) from the URL [https://www.arduino.cc/en/Tutorial/ArduinoToBreadboard](https://www.arduino.cc…
-
Dear designer and friends, did anyone ever encounter this issues ? When i installed Chestnut board and uploaded the code, then I found my Chestnub board cannnot be detected anymore by PC via the #com …
-
Various help and error messages use the words "core" and "platform" interchangeably, as they are synonyms in the Arduino context. This might create confusion, so it would better to be consistent in al…
-
Hello,
I'm not very good at this stuff, but I think the current [variant.h](https://github.com/technoblogy/serpente-core/blob/master/samd/variants/serpente/variant.h) file lacks the configuration n…
-
Greetings, 🏞️
I've run into a problem on a project I was hoping to finish up shortly that involves the use of the **ALA Library**. As my feature list grew and supporting hardware came together, the…
-
Hi, thanks for your great work on this library! I'm using this library as it's much faster than the stock SD Arduino library, and I'm trying to achieve high write speeds.
I'm running your bench exa…
-
## Issue Summary
via https://github.com/ianfixes/arduino_ci/issues/140#issuecomment-656966055
My initial reverse-engineer of arduino compilation used the wrong [compiler options](https://github.…