-
你好,尝试烧录usbd_audio_v1_mic_speaker_multichan实例到M0Sense板子上,PC没有识别出任何的设备,这个示例还需要别的驱动吗?我用blisp flash的板子。
-
i tried to upload using the readme
1) i pulled BOOT pin to 3.3v
2) turned on chip
3) removed the bridge between 3.3v and BOOT
4) pressed upload on pio
ouput:
```
* Executing task: C:\Users\…
-
### Affected Version
`yay v12.0.4 - libalpm v13.0.2`
### Describe the bug
The `--sortby` config option doesn't seem to be working (unsure as to when it stopped, but I know it worked i…
-
git clone project && cd applications/get-started/helloworld
make -j8
```
Your configuration chipname is Ai-Thinker Ai-WB2 Wi-Fi&BLE Module
AS build_out/bl602/evb/src/boot/gcc/entry.o
AS build_…
-
-
**Describe the bug**
using 2.19 Beta for Pinecil V2, get snowy screen when V2 is left to idle in Debug mode. just flipping V2 brings it back to normal view, no need to unplug (sometimes need to pres…
-
Hi hope you are well...
I've sucessfully connected to the above board using openocd (via jtag):
```
jtag
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for teln…
-
It says on the wiki that I should be using "BLFlashEnv", which should be found under `/bl_iot_sdk/tools/flash_tool` for flashing binaries. This doesn't exist in the repo so I'm a bit confused. I tried…
-
why did you work so hard to remove gd32vf103 reference in the documentation ?
It's pretty clear the riscV mcu is this one on your SOC.
-
Hzzz@LAPTOP-7EDE7524 MSYS /d/bl_iot_sdk-master-1.6.32/bl_iot_sdk-master/customer_app/bl602_demo_event
$ ./genromap
****** Please SET BL60X_SDK_PATH ******
****** Trying SDK PATH [/d/bl_iot_sdk-mast…