-
**Describe the Issue**
The regex in the task "2.1.2 Ensure chrony is configured | modify /etc/sysconfig/chronyd" is supposed to add the parameter "-u chrony" and keep all other parameters. But the ta…
-
```
jenkins-leviathan-v2-template-4636-client-1 | [2022-09-12T20:36:47.882Z][27718d4-os] not ok 1 - Boot splash screen should be detected over HDMI interface
jenkins-leviathan-v2-templa…
-
I'm observing an intermittent bug with the wifi module shown here - https://a.co/d/3ICOnOR.
It appears as though the device has two interfaces (wlan0 and wlan1, each with a unique mac address) and …
-
#### Description of problem:
A lot of rules from rhel7 and rhel8 cui profile miss a reference.
List of rhel7 rules:
```
*** rules of 'cui' profile missing CUI Refs: 66 of 104 have them [36% miss…
-
## Issue description
After i added another IPv6 address and rebuilt the system, the VM was not reachable. I had to reboot it!
My change: https://github.com/davidak/nixos-config/commit/19ee6d6679…
-
I ran into a case in 5.1.0 where I built a mesh where some of the far-end hosts had not come up yet. Since latencybg tests are single-particpant, the tasks were still created and powstream is started.…
-
## Bug Report
### Description
Talos uses cloudflare as its ntp source. Time-sync is security-critical, and cloudflare is an untrustworthy actor both in terms of their actions (https://www.reddit…
-
I created a local PV and PVC with local storage class(no provisioner) and `readWriteMany` access mode for storage sharing between pods:
```
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadat…
-
### Relevant telegraf.conf
```toml
[agent]
interval = "10s"
round_interval = true
metric_batch_size = 1000
metric_buffer_limit = 10000
collection_jitter = "0s"
flush_interval = "10s…
-
Hello, I fiddled a bit with this and I cannot seem to be able to get to anything usable.
My board is a RPi4B and I'm using a GPS board with an u-blox NEO-6M-0-001 and UART+PPS pinout. All pins are …