-
Most budget friendly iTag bluetooth trackers nowadays have the Lenze st17h66 mcu (some old stock comes with the st17h26, which is an entirely different architecture, discussed in another issue #?)
Th…
-
| Название | Значение |
|---|---|
| __Производитель__ | _TZE200_3towulqd |
| __Модель__ | TS0601 |
| __Прошивка__ | 82 |
| __WEB Build__ | 1.1.8 |
| __API Build__ | 1.9.3 (8086) |
Детальная и…
-
@andersonhwang : Request a clarification. What is the maximum battery level?
Here is says '3' for a brand new Tag. So id '3' the max or is there any spec. for this?
Thanks in advance.
-
| Название | Значение |
|---|---|
| __Производитель__ | _TZE200_a8sdabtg |
| __Модель__ | TS0601 |
| __Прошивка__ | 67 |
| __WEB Build__ | 1.4.7 |
| __API Build__ | 1.9.8 (11054) |
Детальная …
-
I just bought Aquara switch, however it was not recognized in Home Assistant with any buttons.
After each zha reload, the device is recognized as unknown device.
I noticed that there is already quir…
-
Suggest re-design board with battery-clip/battery-holder/battery-retainer for CR2450 or CR2477 batteries instead of CR2032 batteries?
* CR2477 is 24 x 7.7 mm in size and usually has about 1000 mAh …
-
I seem not to be able to reconnect and open the config (e.g. for adjusting an offset) after having successfully flashed and used one of these. The flasher does connect, but just gives:
07:41:58: Sear…
-
Suggest re-design board with battery-clip/battery-holder/battery-retainer for CR2450 or CR2477 batteries instead of CR2032 batteries?
* CR2477 is 24 x 7.7 mm in size and usually has about 1000 mAh …
-
| Название | Значение |
|---|---|
| __Производитель__ | SONOFF |
| __Модель__ | SNZB-02D |
| __Прошивка__ | 4105 |
| __WEB Build__ | 1.2.20 |
| __API Build__ | 1.9.6 (9869) |
Детальная информ…
-
Some devices (like CGDK2) have a hardware button that is currently unused.
It can be used to implement optional battery optimizations:
- Use a larger advertisement interval (1min), but when the …