-
### Board
ESP-WROVER-KIT V4.1
### Device Description
wrover-kit connected to LoRa Module SX1262
### Hardware Configuration
SD0 connected to MISO of sx1262
SD1 connected to MOSI of sx1262
GPIO5 …
-
**Describe the bug**
When ADR is enabled, the LNS sends LINK_ADR_REQ after 20 uplinks, and the device responds with LINK_ADR_ANS. However, this exchange continues indefinitely because CHANNEL_MASK_AC…
lytzV updated
2 years ago
-
Hi, I use your library for ESP01 and works perfect if I supply to DHT11 5V. But ESP01 should work with 3.3V and I don't want to use a voltage level converter.
My issue is very similar to issue #98.…
-
Hello Jan!
sorry for dumb question, but I carefully read all corresponded issues regarding CubeCell. FSK modem works great at SX1276+ESP32
But my problem is CubeCell at FSK mode. Can not pass ini…
-
I recently started getting these errors when I start my sketch.
-------------------------------------------------------------------------------
```c++
[SX1262] Initializing ... M SX126x
CMD 80 …
-
There are some minor updates that can be made to the devices docs,
- one such is "something" that speaks to a console decoder script file for the documented device samples. Either a pointer to the d…
-
As per the comment https://github.com/jgromes/RadioLib/issues/429#issuecomment-1001028486
> What DL7AD did with pecanpico10 ( https://github.com/DL7AD/pecanpico10 ) is to also set the TX to FSK but…
-
### Devices not able to join the network
Some devices just go on a long JOIN_REQ and JOIN_ACCEPT loop before they actually join the network.
The loop can last a few minutes to many hours.
Happens t…
-
I keep having the error 'SX126x' does not name a type. The board uses a ASR6502mcu. I've tried the examples you have provided and keep getting the same error as well. I set the pins according to the p…
-
I am new to CubeCell GPS Helium Mapper. Do I need to change the region to AS923_1 in platform.io?
how do I do it? I am getting errors when compiling
[{
"resource": "/Users/kenneth.leong/CubeCel…