-
First of all, thanks for this awesome project.
Since I'm debating whether to purchase an AWHP like this, I'd like to ask for some clarification:
* What's `ONEWIRE` / `SDMETER` / `PENKTH000`?
* …
fiesh updated
11 months ago
-
Version: 4.1.14
When in HA selecting the AWAY mode on the thermostat control (climate.thermostaat_leaving_water_temperature) this will not put the device itself in AWAY mode. As far as I can foll…
-
Accroding to https://github.com/home-assistant/core/issues/123539 there is an issue in streamer function.
The code (https://github.com/fredrike/pydaikin/blame/7de7166e4c23a898d455b677b2441521d3a648…
-
### Describe the Bug
switchbot bot always on also if i put in switch mode
### To Reproduce
i turned off in home app but it always switch to on state
### Expected Behavior
when is off it must stay…
-
Version: 4.1.6
Diagnostics (Daikin Onecta Config)
```json
{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.6.3",
"dev": false,
"hass…
-
### The problem
Daikin integration stopped being able to talk to one of the CORA head units running firmware 1.16.0, the following is shown for this specific head unit end point in the Daikin Integra…
-
Some bindings implementing dynamic thing types, channel types or channel group types are now initialized with a delay of 2 minutes. The thing status is UNINITIALIZED/NOT_YET_READY during this delay. A…
-
Hardware: Daikin Emura 3 (FTXJ35A2V1BB)
Problem: No power on PIN4 of S21 port
--> Faikin has no power
I tried to connect PIN1 and PIN4 to power the Faikin with 5V, but I think there is not enou…
-
After upgrading to v1.5.0 the unit becomes unavailable (also in the Onecta app) but it still replies to pings.
I can see the following errors in HA. I've tested individually the 2 PRs from v1.5.0 and…
-
Hello,
great library, works well with my Daikin.
Just one thing: with the origianl remote you can set the temperatures to half degrees. But the temperature parameter is only int. Is there a chance t…